TANDEM AXLE ASSEMBLY - CONTINUED
REMOVAL - CONTINUED
Steps 16 and 17 are steps for left side saddle caps. Repeat for right side.
Four nuts (2) and
Using 1 5/16-inch socket and ratchet
handle with 314-inch drive, unscrew
and take off.
Two saddle caps (1) Take off.
In the following steps you will be raising the vehicle. You must make absolutely sure that the hoist can bear
the weight of the vehicle and hold it securely when vehicle is raised. If the hoist is not secured properly, the
vehicle could fall, causing serious injury and death to you or others.
Rear frame (6) Using 20-ton overhead hoist, lift until
saddle clears equalizer beam.
Check behind vehicle to make sure
there is enough clearance for
Make sure there is no equipm ent in the
With help from assistant, roll straight
out from under frame (6).