 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
STEERING KNUCKLES AND KINGPINS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
NOTE
Right and left side steering knuckles are serviced the same way. Left side is shown. If only right side is
being serviced, skip step 1 and begin at step 2.
REMOVAL
1.
Left side
Drag link Removal (TM 9-2320-269-20-1).
steering knuckle
2.
Bracket (1)
Screw (2), lock-
a.
Using 7/16-inch socket, 6-inch
washer (3), and
extension, and ratchet handle with 3/8-
nut (4)
inch drive, unscrew and take out.
b.
Get rid of lockwasher (3).
3.
Clip (5) and
Take off, and move out of the way.
sensor wire (6)
4.
Two knuckle caps (7)
Two lubrication Using 7/16-inch open-end wrench,
fittings (8)
unscrew and take out.
5.
Six screws (9) and
a.
Using 1/2-inch open-end wrench, 112-
lockwashers (10)
inch socket, and ratchet han dle
with 3/8-inch drive, unscrew and
take out.
b.
Get rid of lockwashers (10).
6.
Steering
Two knuckle caps
a.
Take out.
knuckle (11)
(7), packings (12),
b.
Get rid of packings (12).
and bracket (1)
7.
Front axle (13)
Nut (14) and Using 9/16-inch deep well socket and
washer (15)
ratchet handle with 318-inch drive,
unscrew and take out.
8.
Draw key (16)
Using 3/16-inch drive-pin punch and
3-lb ball-peen hammer, drive out.
9.
Steering
Kingpin (17) Using bronze 3/4-inch driftpin and
knuckle (11)
3-lb ball-peen hammer, drive out.
2-824
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals