TRANSMISSION GOVERNOR ASSEMBLY - CONTINUED
Governor Put in position.
Governor is seated correctly
driven gear makes about a quarter
turn as it meshes with drive gear.
New gasket (3),
Put in position.
governor cover (4),
spacer (5), clamp
and cable (6)
Governor cover (4)
Screw (7) and three a.
Using 1/2-inch socket and
handle with 1/2-inch drive, screw in
Using 112-inch socket and torque
wrench with 112-inch drive, tighten to
15 - 20 ft-lbs (20.3 - 27.1 N m) of
TASK ENDS HERE