LOW RANGE CLUTCH AND PLANETARY ADAPTER
This task covers:
a. Disassembly (page 2-779)
b. Cleaning (page 2-780)
Assembly (page 2-782)
Compressor, first and low clutch
Cloth, crocus (item 7, appendix B)
Compressor, reciprocating air,
Grease, oil soluble (item 21, appendix B)
Packing, preformed, piston, outer
File, fine hand
Packing, preformed, piston, inner
Solvent, dry-cleaning (item 49, appendix B)
Gun, air blow
Hose, air compressor
Screwdriver, flat-tip, 3/8-inch
Wire, soft, 12-inch
Low range clutch and planetary adapter
removed (page 2-650).
Adapter housing (1)
Retainer (2) and
Place adapter housing (1) front side up
on a clean workbench.
Using first and low clutch compressor,
press on retainer (2).
Using 3/8-inch flat-tip screwdriver,
take out snapring (3).