THIRD RANGE CLUTCH, CENTER SUPPORT, AND SECOND RANGE CLUTCH - CONTINUED
DISASSEMBLY - CONTINUED
Using diagonal cutting pliers, cut and
gradually take off in order.
Get rid of.
Second clutch spring
retainer (3) and
20 springs (4)
For more information on how to clean parts, go to General Maintenance Instructions
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
Be sure to wear safety goggles or lenses when using compressed air. Compressed air
and particles moved by compressed air can cause damage to your eyes.
All metal parts
Clean in drycleaning solvent.
Dry parts with compressed air.
Clean oil passages with a piece of soft
wire and by flushing with drycleaning
For more information on how to inspect parts, go to General Maintenance Instructions
Replace damaged or defective parts, as needed.
Backing plates (5)
Look for burrs, heat marks, and wear.
and external tanged
Remove burrs with a crocus cloth or
clutch plates (6)fine hand file.
Look for heat marked, worn, or pitted
clutch plates (7)