FOURTH RANGE CLUTCH - CONTINUED
For more information on how to clean parts, go to General Maintenance Instructions
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
Be sure to wear safety goggles or lenses when using compressed air. Compressed air
and particles moved by compressed air can cause damage to your eyes.
All metal parts
Clean in drycleaning solvent.
Dry parts with compressed air.
Clean oil passages with a piece of soft
wire and by flushing with drycleaning
Clean (TM 9-214).
For more information on how to inspect parts, go to General Maintenance Instructions
Replace damaged or defective parts as needed.
Inspect (TM 9-214).
Backing plate (1)
Look for burrs, heat discoloration, and
and external tanged
Remove burrs with emery cloth or fine
Look for worn, pitted areas on friction
clutch plates (3)
Look for burrs, nicks, or scratches on
inner and outer diameters.
Remove light scratches or burrs with
crocus cloth or fine hand file.