LOW SHIFT VALVE ASSEMBLY - CONTINUED
Before assembling parts in bores, check shape of valves and plugs to make sure they are in correct position. Be
sure correct springs are being used in bore.
Valves should move freely in their bores by their own weight. If they do not, look for burrs on valve or in bore, and
carefully remove burrs with crocus cloth.
7. Low shift valve
Low shift relay
Put in bore.
valve (2), spring
In some models, items (4) and (5)
(3), stop pin (4),
are one piece.
and valve spring
Retainer pin (6)
a. Press on plug (5).
b. Place in position.
c. Using long round-nose pliers, put
Low shift signal
a. Put in bore.
valve (7), valve
b. Move the slot in ring (I11) to same
spring (8), valve
position as noted when removed.
stop (9), washer
c. Keep hand pressure on stop (9) and
(10), and adjusting
Retainer pin (12)
a. Place in position.
b. Using long round-nose pliers, put