LOW SHIFT VALVE ASSEMBLY - CONTINUED
CLEANING - CONTINUED
All metal parts
a. Clean in drycleaning solvent.
b. Clean bores by flushing with
dry cleaning solvent.
c. Dry parts with compressed air.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).
Low shift valve
a. Look for wear, scratches, grooves,
and dirt in bores.
b. Remove scratches with emery cloth.
c. Look for nicks, burrs, and scratches
on mounting faces.
d. Remove scratches with crocus cloth
or soft stone.
If scratches are deep, replace