TRANSMISSION OIL PAN AND LEVEL GAGE TUBE - CONTINUED
If transmission has been removed from the vehicle, skip step 1 thru 3.
1. Clamp (1)
Screw (2), lock-
Using two 7/16-inch open-end
washer (3), and
wrenches, unscrew and take out.
2. Bracket (5)
Move away from.
3. Oil pan (6)
Oil level gage
Using 1 1/16-inch open-end wrench, un-
screw and take off.
4. Oil level gage
5. Oil pan (6)
21 screws (8)
Using 1/2-inch socket and ratchet
handle with 1/2-inch drive, unscrew and
Oil pan (6), gasket
a. Take off.
(10), bracket (11)
b. Get rid of gasket (10).
and two spacers (12)
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent.
Failure to observe these precautions could cause serious injury or death.
Be sure to wear safety goggles or lenses when using compressed air. Compressed air and particles moved by
compressed air can cause damage to your eyes.
All metal parts
a. Clean in drycleaning solvent.
b. Dry with compressed air.