 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
TRANSMISSION SUBASSEMBLIES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CENTER SUPPORT INSTALLATION
100.
Transmission
Center support
a. Repeat steps 60 and 61.
housing (1)
b. Place snapring gap at 12 o'clock
position.
101.
Internal snapring
a. Repeat step 63.
b. Place snapring gap at 12 o'clock
position.
102
New center support
a. Screw in until snug, using 9/16-inch
screw (2) and new
socket and ratchet handle with 1/2-
lockwasher (3)
inch drive.
b. Using 9/16-inch socket and torque
wrench with 1/2-inch drive, tighten to
39 - 46 ft-lb (52.9 - 62.4 N m) of
103.
Center support (4)
Needle roller bear-
Put on, bearing side up.
ing and race (5)
104.
Two clutch sup-
a. Grease with oil-soluble grease.
port step joint
b. Put on.
rings (6)
FOURTH RANGE CLUTCH INSTALLATION
105.
Fourth clutch
Bearing race (8)
a. Put on.
housing (7)
b. Grease with oil soluble grease.
TA238415
2-680
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals