TRANSMISSION SUBASSEMBLIES - CONTINUED
REAR COVER ASSEMBLY INSTALLATION - CONTINUED
c. Tighten the remaining screws in pairs
to 33 ft-lb (44.7 N m) of torque.
d. Repeat the entire pattern above and
tighten all screws to 67-80 ft-lb
(90.9 - 108.5 N m) of torque.
GOVERNOR ASSEMBLY INSTALLATION
Put into position.
Governor is seated correctly when it
makes about a quarter turn as it
meshes with the drive gear.
Governor cover (12)
Put into place.
and new gasket (13)