TRANSMISSION SUBASSEMBLIES - CONTINUED
GOVERNOR ASSEMBLY REMOVAL - CONTINUED
REAR COVER AND OUTPUT SHAFT REMOVAL
Fourteen screws (11)
Using 3/4-inch socket and ratchet handle
and washers (12)
with 112-inch drive, unscrew and take out.
Adapter housing (13)
Output shaft (14),
a. Attach lifter to output shaft (14).
rear cover (8), and
b. Attach portable floor crane to output
shaft lifter, lift out, and set on clean
c. Get rid of gasket (15).
d. Take off lifting equipment.