SUBMERGED FUEL PUMP WIRING HARNESS
This task covers:
a. Removal (page 2-554)
b. Cleaning (page 2-557)
d. Installation (page 2-558)
Pliers, diagonal cutting
Screwdriver, flat-tip, 1/4-inch
Wrench, open-end, 3/8-inch
Battery cables disconnected
Lockwasher, fuel sender terminal
Vehicle seat removed (TM 9-2320-269-20-2).
Lockwasher, pump lead wire and terminal
Rags, wiping (item 42, appendix B)
Solvent, drycleaning (item 49,
Tag, marking (item 50, appendix B)
When taking electrical connectors apart, make sure wires on both sides of connectors are marked with tags.
This will help in locating the right wires and connectors during installation.