MAIN WIRING HARNESS - CONTINUED
CLEANING - CONTINUED
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
Clean with clean rag dampened with
Wipe clean with clean, dry rag.
Wipe clean with damp rag, and using
clean, dry rag wipe dry.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).
Replace damaged or defective parts, as needed.
a. Look for cut, burned and worn
b. Look for broken wires.
Replace as necessary.
Look for missing, broken, and corroded