24-VOLT CONVERTER SYSTEM WIRING HARNESS

TM 9-2320-269-34-1

ANTI LOCK CONTROL MODULES - CONTINUED

INSTALLATION - CONTINUED

NOTE

FOLLOW-ON MAINTENANCE:

1. Connect battery cables (TM 9-2320-269-20-1).

2. Check operation of antilock system at each wheel (TM 9-2320-269-10).

TASK ENDS HERE

24-VOLT CONVERTER SYSTEM WIRING HARNESS

This task covers:

c. Inspection/Replacement (page 2-506)

d. Installation (page 2-506)

INITIAL SETUP

Tools

Personnel Required

Handle, ratchet, 3/8-inch drive

One

Screwdriver, cross-tip, number two

Screwdriver, flat-tip, 3/8-inch

Equipment Condition

Socket, 3/8-inch drive, 9/16-inch

Battery cables disconnected

Wrench, open-end, 3/8-inch

(TM 9-2320-269-20-1).

Wrench, open-end, 7/16-inch

Materials/Parts

Lockwashers, receptacle cover

(four required)

Rags, wiping (item 42, appendix B)

Solvent, drycleaning (item 49,

appendix B)

Tag, marking (item 50, appendix B)

2-501