 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
STARTING MOTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
114.
Lever housing (1)
New seal (2) Using 2-oz ball-peen hammer, tap in until
flush with face of housing (1).
115.
Lever shaft (3)
Two new
Put on.
packings (4)
116.
Shifter lever (5)
a.
Put housing (1) in vise with jaw caps .
b.
Put lever (5) in place.
117.
Lever housing (1)
Lever shaft (3)
Put in place.
and shifter
and two new
lever (5)
packings (4)
118.
Lever shaft (3)
Retaining ring (6)
Put on using snapring pliers.
119.
Plunger (7)
Washer (8), Snap on.
retainer (9), and
boot (10)
120.
Spring (11) and
Slide on.
retainer (12)
121.
Retainer (12)
Retaining ring (13)
Push down spring (11) and retainer
(12),
and put on using snapring pliers.
122.
Lever housing (1)
Plunger (7) with
Put in through hole in shifter lever
(5).
attached parts
123.
Plunger (7)
New self-locking
Screw on, and tighten using 1/2-
inch deep
nut (14)
well socket and ratchet handle with 3/8-
inch drive.
124.
Housing plug (15)
New gasket (16)
Put on.
125.
Lever housing (1)
Housing plug (15)
Screw in, and tighten using 15/16-
inch
and new gasket (16)
screwdriver bit, and ratchet handle with
1/2-inch drive.
2-452
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals