Section VII. ELECTRICAL SYSTEM

TM 9-2320-269-34-1

Section VII. ELECTRICAL SYSTEM

Page

Alternator ..............................................................2-414

Main Wiring Harness............................................ 2-525

Antilock Control Modules......................................2-498

Relay Box ............................................................. 2-602

Antilock Wiring Harness .......................................2-481

Starting Motor....................................................... 2-428

Body Lights Wiring Harness .................................2-593

Stoplight Switch Wiring Harness .......................... 2-567

Cab Mounted Lights Wiring

Submerged Fuel Pump Wiring

Harnesses ......................................................2-560

Harness ......................................................... 2-554

Console Tachometer and Outrigger

Taillight and Marker Wiring

Hydraulic Solenoid Wiring

Harness ......................................................... 2-512

Harness..........................................................2-572

12-Volt Trailer Harness ........................................ 2-519

Engine Wiring Harness.........................................2-470

24-Volt Converter System Wiring

Front Wiring Harness ...........................................2-462

Harness ......................................................... 2-501

This task covers:

a. Disassembly (page 2-415)

Assembly (page 2-421)

b. Cleaning (page 2-449)

Voltage Regulator Testing (page 2-426)

c. Inspection/Replacement/Repair

(page 2-420)

INITIAL SETUP

Tools - Continued

Tools

Socket, 1/4-inch drive, 5/16-inch

Arbor, arbor press, 29132-inch

Socket, 1/4-inch drive, 7/16-inch

diameter

Stand, test, automotive starter and

Caps, vise jaw

generator

Collar, arbor press, 1 7/16-inch

Test fixture, alternator

Compressor, reciprocating air, power

Vise, machinist's

driven

Wire, stiff, 12-inch

Driftpin, brass, 1/4-inch

Wrench, box-end, offset, 15/16-inch

Face, inserted hammer, medium-plastic

Wire, .0937-inch (2.38-mm) diameter

Goggles, safety

Materials/Parts

Gun, air blow

Bearing, slipring and end frame

Hammer, ball-peen, machinist's, 2-oz

Bearing, drive end frame

Handle, speeder, 1/4-inch drive

Cloth, polishing (400 grit) (item 9,

Holder, inserted, hammer-face

appendix B)

Hose, air compressor

Grease, GAA (item 20, appendix B)

Key, socket-head, screw, 5/16-inch

Oil, OE/HDO 30 (item 34, appendix B)

Lathe, engine

Rags, wiping (item 42, appendix B)

Press, arbor, hand operated

Solvent, drycleaning (item 49, appendix B)

Screwdriver, flat-tip, 3116-inch

Spring, brush (two required)

Scribe, machinist's

Socket, 1/4-inch drive, 1/4-inch

Socket, 114-inch drive, 11132-inch

2-414