WATER PUMP - CONTINUED
Four screws (2) and
Using 1/2-inch socket and ratchet
handle with 3/8-inch drive, unscrew
and take out.
Get rid of lockwashers (3).
Water pump pulley
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when
using solvent. Failure to observe these precautions could cause serious injury or death.
Clean in drycleaning solvent.
Wipe dry with clean, dry rags.
For more information on how to inspect parts, go to General Maintenance Instructions
Replace damaged or defective parts as necessary.
Look for cracks, breaks, nicks, and
Look for highly polished belt grooves.
All threaded parts
Look for stripped, nicked, and gouged