 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
WATER PUMP
This task covers:
a.
Removal (page 2-400)
d. Inspection/Replacement (page 2-403)
b.
Disassembly (page 2-402)
e. Assembly (page 2-404)
c.
Cleaning (page 2-402)
f. Installation (page 2-405)
1
INITIAL SETUP
Tools
Materials/Parts - Continued
Driftpin, brass, 1/2-inch
Lockwasher, water pump body
Gage, thickness
(eight required)
Hammer, ball-peen, machinist's
Lockwasher, water manifold
Hammer, rubber
(two required)
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 42, appendix B)
Key, socket-head, screw, 7/32-inch
Seal, water pump
Key, socket-head, screw, 3/16-inch
Sealant, gasket (item 44, appendix B)
Pliers, snapring
Seat, water pump seal
Press, arbor, hand-operated
Solvent, drycleaning (item 49, appendix B)
Socket, 3/8-inch drive, 1/2-inch
Socket, 3/8-inch drive, 9/16-inch
Personnel Required
Stop, shim, 0.060-inch (1.47-mm)
Wrench, open-end, 1/2-inch
One
Materials/Parts
Equipment Condition
Gasket, water pump body (two required)
Water pump pulley removed (page 2-407).
Gasket, water pump housing
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Water pump
Four screws (2)
Using 3/16-inch socket-head screw key,
housing (1)
unscrew and take out.
2. Water pump
Water pump housing
a. Using rubber hammer, tap to loosen,
body (3)
(1) and gasket (4)
and take off.
b. Get rid of gasket (4).
3.
Screw (5)
Using 7/32-inch socket-head screw key,
unscrew and take out.
2-400
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals