GOVERNOR - CONTINUED
ASSEMBLYIADJUSTMENT - CONTINUED
When assembling the flyweight, always install shims and washers as shown, they will be changed as
needed when adjusting the fuel injection pump.
Check tags before installing springs to insure proper operation.
Two washers (2),
spring seat (3), and
Idle spring (5) and
Take off tags.
two maximum speed
springs (6) and (7)
Flyweight post (8)
Outer spring seat
Put on seat (9), and press down.
(9) and cylinder
Screw on nut (10) part way.
Repeat steps 67 thru 69 for opposite
side of flyweight (1).