FUEL INJECTION PUMP - CONTINUED
ASSEMBLY - CONTINUED
112. Fuel injection
Screw in, and tighten to 7 ft-lb
(9.5 N m) of torque using 19 mm
crowfoot wrench and torque wrench with
Control rack (3)
Screw in and tighten using 318-inch
Be sure rack (3) moves freely.
To avoid scratching machined surfaces when installing parts, be sure barrels are wet with clean No. 2 diesel fuel.
Eight barrels (5)
Eight screws (6)
Coat threads with sealing compound.
Screw in and tighten using 5/16-inch
flat-tip screwdriver bit with 3/8-
inch drive and hinged handle.