 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
CAUTION
Parts of the fuel injection pump are machined and polished. Do not scratch or hit with tools to insure proper
operation and avoid early wear of parts.
NOTE
If the closing cap, pump fitting, oil inlet bushing, or bleeder bushing were not removed, go to step 102.
97.
Fuel injection
Mount upright in holding fixture.
pump (13)
98. Fuel injection
Closing cap (14)
a.
Coat threads with sealing compound.
pump (13)
b.
Screw in and tighten using 10-mm hex
key bit with 3/8-inch drive and
ratchet handle.
99.
New gasket (15) and
a.
Coat threads with sealing compound.
pump fitting (16)
b.
Screw in and tighten using 19-mm
open-end wrench.
100.
New gasket (17)
a.
Coat threads with sealing compound.
and oil inlet
b.
Screw in and tighten using 19-mm
bushing (18)
open-end wrench.
TA238099
2-297
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals