FUEL INJECTION PUMP - CONTINUED
DISASSEMBLY - CONTINUED
Some injection pump parts are machined and highly polished. Do not scratch or hit with tools. Always work on a
clean wooden surface.
When removing parts, do not touch machined surfaces. Keep all parts in order to install in original position, and
keep wet with clean diesel fuel.
48. Fuel injection
Eight covers (12)
Using 3/8-inch drive 11/16-inch socket
and plastic-face hammer, drive into pu mp
(8) and take out.
Using tappet removing tool, push up
one sleeve (13) and take out tappet
Take out sleeve (13).
Repeat a thru c for remaining