REMOVAL - CONTINUED - TM-9-2320-269-34-10281

TM 9-2320-269-34-1

FUEL SUPPLY LINES - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL - CONTINUED

Elbow (1)

Nut (2) and

Using 11/16-inch open-end wrench,

pipe (3)

unscrew and pull free.

Take out pipe (3).

Fuel supply pump

Adapter (6) and

Cover with dust caps.

(4) and fuel

elbow (1)

injection pump (5)

CLEANING/INSPECTION

WARNING

Diesel fumes can explode. If welding of fuel tank is necessary, always work in well ventilated area,

and keep tank full of water at all times. Failure to follow these precautions could cause serious

injury or death.

NOTE

For more information on cleaning and inspecting parts, go to General Maintenance Instructions

(page 2-46). Replace damaged parts as necessary.

All parts

Clean with fresh No. 2 diesel fuel.

Wipe dry with clean rags.

Pipe (7)

Check for cracks, dents, and pinched

areas.

Nuts (8) and (9)

Check for stripped and gouged threads.

Check for rounding off of points.

Rubber parts (10)

Check for cracks, brittleness, and wear

atterns.

TA238073

2-264