FUEL INJECTORS - CONTINUED
This procedure is for the front left side injector (number one cylinder), the other seven are
removed in a similar way. If lines are removed, go to step 8.
Diesel fumes can explode. If welding of fuel tank is necessary, always work in well-ventilated area, and
keep tank full of water at all times. Failure to follow these precautions could cause serious injury or
Before removing lines or injectors, clean all parts with No. 2 diesel fuel and rags to avoid getting dirt or
debris into engine causing equipment damage.
Screw (2) and
a. Using 1/2-inch socket, 3-inch
extension, and ratchet handle with
3/8-inch drive, unscrew and
b. Get rid of lockwasher (3).
If the number one or three injector is not being removed, go to step 3.
Two clamps (4)
Two pipes (5)
Using 11/16-inch open-end wrench,
unscrew part way.