 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
SWIRL DESTROYER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
8.
Lever (1) and
Cotter pin (3), pin
a. Using angle-nose slip-joint pliers,
yoke (2)
(4), and two split
straighten pin (3), and pull out.
washers (5)
b. Pull out pin (4).
c. Get rid of cotter pin (3).
9.
Lever (1)
Yoke (2) with
Take off.
control rod (6)
10.
Control rod (6)
Nut (7)
a. Count and record number of exposed
threads.
b. Using 3/8-inch open-end wrench,
loosen.
11.
Yoke (2) and
Unscrew and take off.
nut (7)
12.
Cable bracket (8)
Control rod (6)Pull out.
and two split
washers (9)
13.
Lever (1) and
Two self-locking
a. Using 3/8-inch and 7/16-inch open-
two ball joints (10)
nuts (11)
end wrenches, unscrew and take off.
b. Get rid of nuts (11).
14.
Lever (1)
Two ball joints (10)
Take off.
and washers (12)
NOTE
Steps 15 thru 18 cover one swirl destroyer shaft and intake manifold. Repeat for other shaft and
manifold.
15.
Two actuating
Four nuts (14)
a. Count number of exposed threads at
rods (13)
each end of each rod (13) and record.
b. Using 7/16-inch and 3/8-inch open-
end wrenches, unscrew.
16
Four ball joints
Unscrew and take off.
(10) and (15) and
four nuts (16)
2-238
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals