INTAKE MANIFOLDS - CONTINUED
REMOVAL - CONTINUED
Using 3/8-inch and 7116-inch open-end
end wrenches, unscrew and take out.
Intake manifold (3)
Using 3/8-inch open-end wrench, unscrew
and take out.
Eight screws (4),
Using §/16-inch socket and ratchet handle
washers (5), and
with 3/8-inch drive and 9/16-inch open-
and two extension
end wrench, unscrew and take out.
clips (6) on right -
On right side intake manifold, there
side intake manifold (7)
are only six mounting screws.
9. Cylinder head (8)
a. Lift of.
(3and (7) and
b. Get rd of gaskets (18).
Using 7116-inch open-end wrench, un-
screw and take off.
Using 112-inch open-end wrench, unscrew
and take off.