This task covers:
a. Removal (page 2-226)
d. Inspection/Replacement (page 2-229)
b. Disassembly (page 2-228)
e. Assembly (page 2-230)
c. Cleaning (page 2-229)
f. Installation (page 2-230)
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 42, appendix B)
Screwdriver, flat-tip, 1/4-inch
Solvent, drycleaning (item 49, appendix B)
Socket, 3/8-inch drive, 9/16-inch
Wrench, open-end, 3/8-inch
Wrench, open-end, 7116-inch
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch
Wrench, open-end, 7/8-inch
Wrench, open-end, 15/16-inch
Fuel injection pump removed (page 2-278).
Ether starting aid and bracket removed
(page 2-374) (left side intake manifold
Gasket, intake manifold
Lockwasher, cable bracket
This procedure covers left side intake manifold except where noted.
1. Intake manifold (1)
2. Cable bracket (3)
Screw (4) and lock-
a. Using 9/16-inch open-end wrench, un-
screw and take off.
b. Get rid of lockwasher (5).