ENGINE OIL COOLER - CONTINUED
INSTALLATION - CONTINUED
FOLLOW-ON MAINTENANCE: Close left side engine compartment hood
TASK ENDS HERE
ENGINE OIL COOLER BRACKET
This task covers:
a. Removal (page 2-222)
d. Inspection/Replacement (page 2-224)
b. Disassembly (page 2-223)
e. Assembly (page 2-224)
c. Cleaning (page 2-224)
f. Installation (page 2-225)
Handle, ratchet, 3/8-inch drive
Socket, 318-inch drive, 9/16-inch
Wrench, open-end, 7116-inch
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch
Transmission oil pressure sending unit removed
Wrench, open-end, 1 1/8-inch
Oil pressure lockout switch removed
Engine oil cooler removed (page 2-218).
Engine oil filters removed
Gasket (two required)(TM 9-2320-269-20-1).
Lockwasher (16 required)
Rags, wiping (item 42, appendix B)
Solvent, drycleaning (item 49, appendix B)
Tube assembly (2)
Using 112-inch and 7116-inch open-end
wrenches, unscrew and take off.
16 screws (4) and
a. Using 9/16-inch socket and ratchet
handle with 3/8-inch drive, unscrew and
b. Get rid of lockwashers (5).