FRONT CRANKCASE COVER - CONTINUED
DISASSEMBLY - CONTINUED
With assistant using 1 1/8-inch open-
end wrench, unscrew and take out.
Using 14-inch pipe wrench, unscrew and
Two screws (21),
Using 9/16-inch socket and ratchet
handle with 1/2-inch drive, unscrew
plate (23) and
and take out.
Get rid of lockwashers (22) and
Nut (25) and
Using 11/16-inch open-end wrench,
unscrew and take out.
Do not remove oil seal unless it needs replacement. Removing seal will ruin it.
Oil seal (27)
Using seal puller, pull off.