TAPPET COVER - CONTINUED
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).
Replace damaged parts as needed.
Tappet cover (1)
Look for cracks, breaks, dents, and bends.
5. Cylinder block (4)
New gasket (5) and
Place in position.
tappet cover (1)
6. Tappet cover (1)
Six washers (3)
Screw in, and tighten using 1/2-inch
and screws (2)
socket and ratchet handle with 1/2-inch
Install one cylinder head (page 2-102).
Install swirl destroyer (page 2-236).
TASK ENDS HERE