ROCKER ARMS - CONTINUED
DISASSEMBLY - CONTINUED
4. Eight rocker arms
Eight locknuts (5)
a. Using 9/16-inch socket and ratchet
(1), (2), (3),
handle with 1/2-inch drive, unscrew
and take off.
b. Get rid of.
Using 3/16-inch flat-tip screwdriver,
unscrew through bottom and take off.
6. Oil supply
Screw (8) and a.
Using 7/16-inch socket and ratchet
handle with 3/8-inch drive, unscrew
and take out.
b. Get rid of lockwasher (9).
7. Rocker arm
Using arbor press, take off.
For more Information on how to clean parts, go to General Maintenance Instructions (page 2-46).
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent.
Failure to observe these precautions could cause serious injury or death.
Be sure to wear safety goggles or lenses when using compressed air. Compressed air and particles moved by
compressed air can cause damage to your eyes.
All metal parts
a. Clean in drycleaning solvent.
Make sure oil passages are clean.
b. Blow dry with compressed air.