CYLINDER BLOCK - CONTINUED
INSPECTIONIREPLACEMENT - CONTINUED
Wipe area dry with clean, dry rag.
Immediately apply a coating of
quick-drying zinc oxide powder
mixed with wood alcohol.
If cracks are present, a brown dis-
coloration will appear in th e zinc
If any cracks are found replace the
Oil pump and
Using micrometer, check inside dia-
meter of lower part of bearing (4).
Diameter must not be more than
0.487 to 0.488 inch (12.357 to
If bearing (5) is not within given
limits, go to repair step 16 for re-