 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
FRONT ENGNE MOUNTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
11.
Front engine mount
Upper locking
a.
Put in position, lining up holes.
(2) and front
plate (3)
b.
Using jack, lower engine onto plate (3)
crankcase cover (7)
and frame (1).
12.
Front crankcase
Two spacers (8),
Put in position.
cover (7) and
lower locking plate
frame (1)
(9), and lower
insulator (10)
13.
Lower insulator (10)
Two screws (11),
Screw in, and tighten using 3/4-inch
and front crank-
four washers (12),
socket, 3-inch extension, ratchet handle
case cover (7)
and nuts (13)
with 1/2-inch drive, and 314-inch open-
end wrench.
14.
Rear engine
Two screws (15) and
Using 15/16-inch socket and ratchet handle
mount (14)
lockwashers (16)
with 3/4-inch drive, tighten.
15.
Right and left side
Two screws (18)
a.
Using 15/16-inch socket, ratchet
engine mounts (17)
and nuts (19)
handle with 3/4-inch drive, and
1 1/16-inch open-end wrench, tighten.
b.
Remove jack from under engine.
TA2379
2-85
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals