FRONT ENGNE MOUNTS - CONTINUED
Right and left
Two screws (2)
Using 15/16-inch socket, ratchet handle
and nuts (3)
with 3/4-inch drive, and 1 1/16-inch
open-end wrench, unscrew but do not take
Two screws (5)
Support engine with hydraulic jack.
and lockwashers (6)
Using 15/16-inch socket and ratchet
handle with 3/4-inch drive, unscrew
but do not take out.
Two screws (9),
Using 3/4-inch socket, 3-inch exten-
cover (7) and
spacers (10), upper
sion, ratchet handle with 1/2-inch
locking plate (11),
drive, and 3/4-Inch open-end wrench,
lower locking plate
unscrew and take out.
(12), lower Insula-
Take off plate (12) and lower
tor (13), four wash-
ers (14), and two
Two screws (17),
Using 15/16-inch socket, ratchet han-
mount (16) and
die with 3/4-inch drive, and 15/16-
and nuts (19)
inch open-end wrench, unscrew and
Get rid of lockwashers (18).