 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
ENGINE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
71.
Front engine mount-
Two upper insulators
Put in position.
Ing bracket (1) and
(3), two upper
two side engine
washers (4), and
mounting frame
one locking
brackets (2)
plate (5)
72.
Engine assembly (6)
a. Take assembly (6) out of engine over-
and transmission
haul stand and support with hoist and
assembly (7)
lifting slings.
b. With help from assist ants, put in po-
sition on brackets (1) and (2).
c. Support rear of transmission with
trestle.
73.
Two side engine
Screws (9)
a. Put in position.
mounting brackets
b. Using 2-lb ball-peen hammer, tap
(8) and engine
screws (9) through hole.
mounting frame
brackets (2)
74.
Two lower insulators
a. Place in position.
(10), washers (11),
b. Screw on, and tighten using 15/16-
two new lockwashers
inch socket, 3-inch extension, ratchet
(12) and nuts (13)
handle with 3/4-inch drive, and
1 1116-inch open-end wrench.
75.
Front engine mount-
Lower Insulator
Put in position.
Ing bracket (1) and
(15), front spacer
crankcase front
(16), and two
cover (14)
spacers (17)
76.
Front spacer (16)
Four washers (18),
Screw together, and tighten using 3/4-
and crankcase front
two screws (19), and
inch socket, 3-inch extension, and ratchet
cover (14)
nuts (20)
handle with 1/2-inch drive, and 3/4-inch
open-end wrench.
2-70
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals