ENGINE ASSEMBLY - CONTINUED
UNCOUPLE - CONTINUED
Four screws (10)
Using 9/16-inch socket and ratchet hand
and washers (11)
with 112-inch drive, or 9/16-inch open-
end wrench, unscrew only at 9, 11, 1, and
3 o'clock positions and take out.
Use 6-inch extension with 112-inch
drive, where needed.
Eight screws (12)
Using 9116-inch socket and ratchet
and washers (13)
handle with 112-inch drive, unscrew
and take out.
Be careful when separating transmission from engine. Torque converter can slide out of
transmission and fall, causing Injury to you and damage to equipment.
Flywheel housing (4)
a. Using hoist, move away from engine
and gasket (14)
set down on wooden pallet.
b. Get rid of gasket (14).