ENGINE ASSEMBLY - CONTINUED
REMOVAL - CONTINUED
Pressure hose (15)
a. Place pail underneath to catch draining
b. Using 3/4-inch open-end wrench, un-
screw and take out.
c. Allow fluid to drain.
d. Tag hose(15).
e. Get rid of fluid (page 2-46).
Hose clamp (16)
Using 1/4-inch flat-tip screwdriver,
unscrew to loosen.
Return hose (18)
a. Slide clamp (16) down on hose (18).
and hose clamp (16)
b. Twist hose (18) to loosen and pull off
c. Tag hose (18).