 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
ENGINE ASSEMBLY
This task covers:
a. Removal (page 2-53)
c. Couple (page 2-68)
b. Uncouple (page 2-66)
d. Installation (page 2-70)
INITIAL SETUP
Tools
Materials/Parts - Continued
Driftpin, brass, 1/4-inch
Cotter pin, yoke and clevis
Driftpin, brass, 1/2-inch
Gasket, transmission to flywheel housing
Extension, 1/2-inch drive, 3-inch
Lockwasher, accelerator cable bracket
Extension, 1/2-inch drive, 6-inch
Lockwasher, cable clamp
Hammer, ball-peen, machinist's, 2-lb
Lockwasher, hand hole cover
Handle, ratchet, 3/8-inch drive
Lockwasher, rear engine mount (two required)
Handle, ratchet, 1/2-inch drive
Lockwasher, solenoid
Handle, ratchet, 3/4-inch drive
Lockwasher, wire clamp bracket
Hoist with lifting slings
Lockwasher, side engine mounting brackets
Pail, utility
(two required)
Pallet, wooden, 4 ft x 4 ft
Lockwire (item 26, appendix B)
Plates, lifting (Manufactured Items
Oil, engine (item 32, appendix B)
List, appendix C) (two required)
Rags, wiping (item 42, appendix B)
Pliers, diagonal cutting
Seals, exhaust pipe (two required)
Pliers, slip-joint, angle-nose
Tag, marking (item 50, appendix B)
Screwdriver, cross-tip, number two
Screwdriver, flat-tip, 1/4-inch
Personnel Required
Socket, 3/8-inch drive, 7/16-inch
Socket, 3/8-inch drive, 1/2-inch
One
Socket, 3/8-inch drive, 9/16-inch
Socket, 1/2-inch drive, 9/16-inch
Equipment Condition
Socket, 112-inch drive, 3/4-inch
Socket, 1/2-inch drive, 15/16-inch
Tachometer adapter and cable removed
Socket, 3/4-inch drive, 2-inch
(TM 9-2320-269-20-2).
Socket, deep well, 1/2-inch drive,
Oil pressure lockout switch removed
9/16-inch
(TM 9-2320-269-20-1).
Stand, engine overhaul
Winch, winch support, and bumper assembly
Trestle, motor vehicle, 2-ton
removed (TM 9-2320-269-20-2).
Wrench, open-end, 1/4-inch
Fenders, radiator, and grille assembly
Wrench, open-end, 3/8-inch
removed (TM 9-2320-269-20-2).
Wrench, open-end, 1/2-inch
Engine and transmission cover removed
Wrench, open-end, 5/8-inch
(TM 9-2320-269-20-2).
Wrench, open-end, 7/16-inch
Air cleaner removed (TM 9-2320-269-20-1).
(two required)
Thermostats removed (TM 9-2320-269-20-1).
Wrench, open-end, 9/16-inch
Fuel shutoff cable removed
Wrench, open-end, 3/4-inch
(TM 9-2320-269-20-1).
Wrench, open-end, 7/8-inch
Crankcase drained (LO 9-2320-269-12).
Wrench, open-end, 15/16-inch
Transmission-to-center bearing flange re-
Wrench, open-end, 1-inch
moved (TM 9-2320-269-20-1).
(two required)
Air reservoir tanks drained
Wrench, open-end, 1 1116-inch
(TM 9-2320-269-20-1).
2-52
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals