RECOVER AND DISASSEMBLE TFPE FOR REPACKING.

2.15 RECOVER AND DISASSEMBLE TFPE FOR REPACKING.

NOTE

During disassembly and repacking operations, dirt or foreign materials on any

components should be cleaned off before placing them in carrier bag. Ensure

all components are thoroughly dry before placing them in carrier bag. Air dry-

ing or wiping with a cloth should be sufficient.

Remove inert shock tube from inert M81.

Clean and install weather-proofing plug and safety pin into inert M81.

Rewind inert shock tube while returning to dug holes.

Remove sandbag from M9 and empty sandbag.

Remove inert primalines from M9 by opening M9 flap.

NOTE

Do not pull on inert primaline to remove inert explosive containers from hole if

containers are covered in dirt. The inert primaline or inert explosive container

may be damaged.

f. Separately remove inert explosive containers from holes by carefully pulling up on inert

primaline or cord.