PART NUMBER INDEX - TM-9-1375-213-34-P0056

TM 9-1375-213-34&P

b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alpha-

numeric sequence (vertical arrangement of letters and number combinations which place the first letter or

digit of each group in order A through Z, followed by the numbers 0 through 9 and each following letter or

digit in like order).

(1) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric

code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.

(2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm

corporation, or Government activity) which controls the design and characteristics of the item by means of its

engineering drawings, specifications, standards, and inspection requirements to identify an item or range of

items.

(3) STOCK NUMBER column. This column lists the NSN for the associated part number and manu-

facturer identified in the PART NUMBER and CAGEC columns to the left.

(4) FIG. column. This column lists the number of the figure where the item is identified/located in

Section II.

(5) ITEM column. The item number is that number assigned to the item as it appears in the figure ref-

erenced in the adjacent figure number column.

c. FIGURE AND ITEM NUMBER INDEX. This index lists the figures in the order in which they

appear in Section II.

(1) FIG. column. This column lists the number of the figure where the item is identified/located in

Section II.

(2) ITEM column. The item number is that number assigned to the item as it appears in the figure ref-

erenced in the adjacent figure number column.

(3) STOCK NUMBER column. This column lists the NSN for the item.

(4) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric

code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.

(5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm

corporation, or Government activity), which controls the design and characteristics of the item by means of its

engineering drawings, specifications, standards, and inspection requirements to identify an item or range of

items.

B-5 Special Information.

a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column

heading. Usable on codes are shown as "UOC: . . . . . . ." in the Description Column (justified left) on

the first line applicable item description/nomenclature. Uncoded items are applicable to all models.

Identification of the usable on codes used in the RPSTL are:

Code

Used On

Blasting Machine 10-CAP

BMA

Blasting Machine 50-CAP

BMB

B-6