DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnos-
tic equipment (TMDE); and other special support equipment required for performance of direct support and
general support (DS/GS) maintenance of Demolition Materials. It authorizes the requisitioning, issue, and
disposition of spares, repair parts and special tools as indicated by the source, maintenance and recoverability
In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sec-
a. Section II - Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in
the performance of maintenance. The list also includes parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the
parts in each group listed in ascending figure and item number sequence. Bulk materials are listed by item
name in FIG BULK at the end of the section. Repair parts for repairable special tools are also listed in this
section. Items listed are shown on the associated illustrations.
b. Section III - Special Tools List. Not applicable.
c. Section IV - Cross-reference Indexes. A list, in National item identification number NIIN)
sequence, of all National stock numbered items appearing in the listings, followed by a separate list in alpha-
numeric sequence of all part numbers appearing in the list. National stock numbers and part numbers are
cross-referenced to each illustration figure and item number appearance.
B-3. Explanation of Columns (Sections II and III).
a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-
position code containing supply/requisitioning information, maintenance level authorization criteria, and dis-
position instructions, as shown in the following breakout: