Quantcast Table 4-3. Location of Markings - Continued - TM-9-1375-213-34-P0026

 

Click here to make tpub.com your Home Page

Page Title: Table 4-3. Location of Markings - Continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table 4-3. Location of Markings - Continued - TM-9-1375-213-34-P0025
Up
TM-9-1375-213-34-P Demolition Materials Manual
Next
Table 4-3. Location of Markings - Continued - TM-9-1375-213-34-P0027
TM 9-1375-213-34&P
Table 4-3. Location of Markings - Continued
M20- INSERT LOT NUMBER. THE WORD "LOT" SHALL NOT BE USED. LOT NUMBERS
SHALL BE ON ONE OR TWO LINES STARTING AT BOTTOM OF END CLEAT OR END
BATTEN (WIREBOUND BOXES). WHEN TWO LINES ARE USED, LOT NUMBER
SHALL BE DIVIDED BETWEEN DATE DESIGNATION AND LOT INTERFIX NUMBERS.
M21- WHEN REQUIRED BY ITEM SPECIFICATION OR PACKING AND MARKING BOX
DRAWING, SEE MIL-STD-397. APPLY NATO SYMBOL OF INTERCHANGEABILITY
TO LEFT (AS SHOWN) OR RIGHT OF NOMENCLATURE ON SIDE OF BOX USING
SAME INK AND COLOR AS REQUIRED FOR LETTERING.
M22-
M23- AREA RESERVED FOR BAR CODE LABELS. SEE INSTRUCTIONS SHEET.
CORRECTION OF MARKING AND RE-MARKING
WHEN MARKING IS TO BE CORRECTED OR REPLACED, THE OLD MARKING
SHALL BE EITHER SANDED OFF OR OBLITERATED AS SPECIFIED IN
MIL-STD-129-1 (REF) SO THAT NO "SHOW-THROUGH" IS VISIBLE. NEW
MARKING SHALL BE APPLIED AS STATED HEREON. RE-MARKING THROUGH-
OUT A LOT SHALL BE UNIFORM, CLEAN AND CLEARLY LEGIBLE. RE-MARKING
TO CORRECT POOR WORKMANSHIP SHALL BE KEPT TO A MINIMUM.
REMARKING MAY BE ACCOMPLISHED THROUGH COMPLETE OBLITERATION
OF A PANEL OR SPOT OBLITERATION AS DEEMED ACCEPTABLE BY THE
RESPONSIBLE GOVERNMENT ACTIVITY.
MARKING INSTRUCTIONS FOR GROUP A CHEMICAL AMMUNITION
A BOX CONTAINING GROUP A CHEMICAL AMMUNITION SHALL BE MARKED IN
ACCORDANCE WITH THIS DRAWING AND SHALL BE COLOR CODED IN ACCOR-
DANCE WITH INSTRUCTIONS CONTAINED IN DRAWING D150-2-1 (REF), CODE
IDENT NO. 81361, EDGEWOOD ARSENAL, MARYLAND.
MARKING INSTRUCTIONS FOR LESS THAN FULL BOXES
MLF 1- WHEN LESS THAN FULL BOX (LIGHT BOX) OF ANY AMMUNITION
ITEM IS PACKED IN A BOX LESS THAN THREE CUBIC FEET. THE BOX
SHALL BE PAINTED ORANGE AND APPROPRIATELY MARKED (NOTES 3 AND
MLF 4).
MLF 2- THE WORDS "LIGHT BOX' SHALL BE MARKED ON THE TOP AND THE SIDE
OF THE BOX THAT CONTAINS THE IDENTIFICATION MARKING, IF SPACE
PERMITS. IF THERE IS NO SPACE, THE LIGHT BOX MARKINGS SHALL BE
PLACED ON THE ADJACENT END PANEL. THE SIZE OF THE LETTERING IS
THE SAME AS USED FOR NOMENCLATURE MARKINGS.
MLF 3- FOR DEFINITION AND PACKING OF LIGHT BOX SEE DWG 9325874 (REF).
MLF 4- A LIGHT BOX 3 CUBIC FEET OR LARGER SHALL BE IDENTIFIED BY
MARKING THE WORDS "LIGHT BOX" IN ORANGE, NOTE 3, ON THE TOP
BOTTOM, SIDES, AND ENDS OF THE BOX IN THE LARGEST PRACTICAL
LETTERS. (SKIDDED CONTAINERS SHALL NOT BE MARKED ON THE
BOTTOM.)
MARKING INSTRUCTIONS FOR INTERPLANT SHIPMENT
M1S 1- WHEN THE ITEMS PACKED ARE INTENDED ONLY FOR INTERPLANT
SHIPMENT THE INFORMATION REQUIRED ON THIS DRAWING EXCEPT
FOR PROPER SHIPPING NAME AND IDENTIFICATION NO. AND POP
MARKING, MAY BE PLACED ON LABELS.
4-14

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.