Section 2. SCALE DIAL (GUNNER'S AID)
4-3. SCALE DIAL (GUNNER'S AID) MAINTENANCE PROCEDURES INDEX
4-4. SCALE DIAL (GUNNER'S AID) REMOVAL
#2 cross tip screwdriver (Phillips type)
3/32" socket head screw key (Allen wrench or equivalent)
EQUIPMENT CONDITION: Azimuth indicator on work bench
Dial (Gunner's Aid) Assembly is spring loaded. Be careful
and lift off slowly when removing.
Using screwdriver, remove three screws (1) from dial (2).
Slowly lift off dial (2); spring tension clip (3) will be released.
Using Allen wrench, remove six setscrews (4) and remove clamp (5).
END OF TASK