j. Perform the alignment and boresighting procedures as
f. Place the convex washer (flat side up) and concave
described in paragraph 4-3.
washer (flat side down) on the mounting bracket.
g. Secure the aft support with the self-locking nut.
h. Secure the front support assembly, using the key
washer, convex washer, concave washer, and self-locking
After completion of linkage assembly
installation and alignment, wipe the rail clean
with a soft cloth and alcohol or other solvent
i. Connect the cable connector and secure the
conforming to MIL-A-6091.
connectors with the captive screws.