(2) PART NUMBER column.
Indicates the primary number used by
the manufacturer (individual, firm, corporation, or Government activ-
ity), which controls the design and characteristics of the item by
means of its engineering drawings, specifications standards, and
inspection requirements to identify an item or range of items.
(3) STOCK NUMBER column.
This column lists the NSN for the
associated part number and manufacturer identified in the PART NUMBER
and FSCM columns to the left.
(4) FIG. column.
This column lists the number of the figure
where the item is identified/located in Section II and III.
(5) ITEM column.
The item number is that number assigned to the
item as it appears in the figure referenced in the adjacent figure
USABLE ON CODE.
The usable on code appears in the lower left
Usable on codes are shown
corner of the Description column heading.
as "UOC: . . . . . . . " in the Description column (justified left)
on the first line applicable item description/nomenclature.
Identification of the usable on
items are applicable to all models.
codes used in the RPSTL are:
M32E1 Tank Periscope
M32CE1 Tank Periscope
Bulk materials required to manufac-
ture items are listed in the Bulk Material Function Group of this
RPSTL. Part numbers for bulk materials are also referenced in the
description column of the line item entry for the item to be manufac-
Detailed fabrication instructions for items source
codes to be manufactured or fabricated are found in TM 9-1240-379-34.
Items which have the word BULK in the figure
column will have an index number shown in the item number column.
This index number is a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in Section II.
The publication(s) listed below
pertain to the M32 Series Tank Periscopes and their components.