a. RepIacement of Access Cover (see fig. 3-4).
the high point on the bead of the seal. Do not apply so
much grease that it fills the grooves on either side of the
(1) Remove nine screws (1), nine washers (2)
bead. Apply by hand.
and access cover (3). Inspect screws and washers for
(3) Install new access cover in the reverse
damage and replace as necessary.
order of step (1).
(2) Lubricate the seal on the access cover by
applying a thin, uniform, film of grease. MIL-G-4343, to