Table 2-3. General Support Alignment Kit (11738863)
To provide power to receiver
transmitter unit (A76) when the
ballistic cover is removed.
To carry and store all items of the
alignment kit special tools and test
Goggles, laser safety
To provide eye protection during
receiver-transmitter unit (A76)
Lens assembly, alinement
To permit alinement of eyepiece
reticle with transmitter laser beam.
Tool, boresight adjustment
To adjust screws which aline transfer
Table 2-4. Standard Tools and Test Equipment
National Stock No.
Multimeter, Simpson 260 or
Nitrogen, Technical (Tank)
Oscilloscope, Tektronix, model 545
Tool Kit, Fire Control Instrument
General installation and maintenance
Tool Kit, Turret Mechanic
2-4. Hot Mock-up Interconnection Diagram.
a. A hot mock-up is to be set up to verify a fault in
receive-transmitter tester (hereinafter referred to as R/T
tester) and PFN charge ammeter, special equipment, are
the unit(s) of the laser range finder and adjust the pulse
used in conjunction with the hot mock-up to perform
forming network (PFN). Set up the hot mock-up as
receiver sensitivity and transmitter output tests.
illustrated in figure 2-5 using the laser range finder units,
b. The PFN can be adjusted at direct support.
the test cables (or system cables if available), and a
Troubleshooting and repair of the receiver-transmitter is
prime power source. The test cables are part of the
limited to general support.
laser range finder special tools and test equipment. The