MAINTENANCE OF MATERIEL USED IN CONJUNCTION
WITH TELESCOPE M127 AND M127A1 (M127E1)
Section I. DESCRIPTION
from the eyepiece tube and attached at the other end,
Hanger Assembly (8, Fig. 1-1)
through a bearing, to a support bracket attached to the
The hanger assembly 8570106 supports the eyepiece
The hanger assembly permits full
end of the telescope when installed in the vehicle. The
articulation with nominal eyepiece displacement in a
hanger is machined to form a precise fit on the coaxial
mounting lug extending
Section II. MAINTENANCE OF HANGER ASSEMBLY
Repair of Hanger Assembly (Fig. 4-1)
a. Inspect the general condition of all parts.
a. Repair is limited to the replacement of the items
1 through 4.
b. Inspect bearing for binding, rough movement,
b. Ring (4) is limited to replacement when removal
rust or corrosion.
of hanger assembly (5) from the turret roof is necessary.
c. Inspect hardware for rust or corrosion.
Refer to TM 9-2350-230-12, Figure 11-40.
Change 1 4-1