Code for Manufacturer (FSCM) in parentheses. The
FSCM is used as an element in item identification to
F Support item is removed, replaced, used at Direct
designate manufacturer or distributor or Government
Agency, etc., and is identified in SB 708-42.
H Support item is removed, replaced, used at General
d. Unit of Measure (U/M). Indicates the standard
or basic quantity by which the listed item is used in
D Support item is removed, replaced used at Depot
performing the actual maintenance function.
measure is expressed by a two-character alphabetical
abbreviation, e.g., ea, in, pr, etc., and is the basis used to
Indicates whether the
indicate quantities and allowances in subsequent
item is to be repaired and identifies the lowest
columns. When the unit of measure differs from the unit
maintenance level with the capability to perform
of issue, the lowest unit of issue that will satisfy the
complete repair (i.e., all authorized maintenance
required units of measure will be requisitioned.
functions). Repair codes are:
e. Quantity Incorporated in Unit.
quantity of the item used in the breakout shown in the
O The lowest maintenance level capable of complete
illustration figure, which is prepared for a functional
repair of the support item is the Organizational level.
group, subfunctional group, or an assembly.
F The lowest maintenance level capable of complete
appearing in this column in lieu of a quantity indicates
repair of the support item is Direct Support.
that no specific quantity is applicable, e.g., shims,
H The lowest maintenance level capable ¢f complete
repair of the support item is General Support.
f. O30-Day DS/GS Maintenance Allowances.
D The lowest maintenance level capable of complete
(1) The repair parts indicated by asterisk (*)
repair of the support item is the Depot level.
entries in separate allowance column(s) for DS and GS
represents those parts authorized for use at that
(3) Recoverability Codes. Indicates the disposition
category of maintenance and will be requisitioned on an
action on unserviceable items.
"as required" basis.
(2) Allowance quantities are indicated in the
special tools list section for special tools, TMDE, and
EZ Non-reparable item. When unserviceable, condemn
other support equipment.
and dispose at the level authorized to replace the item.
g. 1-Year Allowances Per 100 Equipments/
F Repairable item. When uneconomically repairable,
Contingency Planning Purposes. No entries will appear
condemn and dispose at Direct Support level.
in this column.
H Repairable item. When uneconomically repairable,
h. Depot Maintenance Allowances Per 100
condemn and dispose at General Support level.
This column indicates that the items
identified with an asterisk (*) are authorized to be
Repairable item. When beyond lower level repair
requisitioned "as required".
capability, return to Depot. Condemnation and
i. Illustration. This column is divided as follows:
disposal not authorized below Depot level.
Indicates the figure
L Reparable item. Repair, condemnation and disposal
number of the illustration on which the item is shown.
not authorized below depot/specialized repair activity
(2) Item Number.
Indicates the callout
number used to reference the item on the illustration.
A Item requires special handling or condemnation
procedure because of specific reasons (i.e., precious
4. Special Information.
metal content, high dollar value, critical material or
a. Usable on codes are included in Column 3.
hazardous material). Refer to appropriate
Uncoded items are applicable to all models.
manuals/directives for specific instructions.
Identification of the usable on codes used in this
b. Federal Stock Number. Indicates the Federal
stock number assigned to the item and will be used for
c. Description. Indicates the Federal item name
and a minimum description required to identify the item.
The last line indicates the reference number followed by
the applicable Federal Supply